如何从@@3D设计软件@@Unigraphics »UG 输出@@STL格式文件@@@@
File > Export > Rapid Prototyping
Set Output type to Binary
Set Triangle Tolerance to 0.0025
Set Adjacency Tolerance to 0.12
Set Auto Normal Gen to On
Set Normal Display to Off
Set Triangle Display to On
- 文件@@>导出@@>快速成型@@
- 设置输出@@类型设置为二进制@@
- 设置三角公差为@@0.0025
- 设置邻接公差为@@0.12
- 设置自动正常艮为开@@
- 设置正常显示为关闭@@Off
- 设置三角形显示为开启@@ On
本文地址@@@@//www.aramidental.com/knowledge/964.html